Type: | Flat Die Platen Wheel |
---|---|
Voltage: | 380V |
Automatic Grade: | Automatic |
Controlling Mode: | CNC |
Energy Saving: | Energy Saving |
Certification: | CE, ISO |
Customization: |
---|
Suppliers with verified business licenses
Model | Power(kw) | Pellet Diameter(mm) | Capacity(t/h) | Weight(t) | Size(mm) |
SHD560 | 90 | 4-12 | 1.0-1.5 | 6.1 | 2500*1300*2300 |
SHD560 | 110 | 4-12 | 1.3-1.8 | 6.5 | 2500*1300*2300 |
SHD650 | 132 | 4-12 | 1.5-2.0 | 6.7 | 2600*1300*2400 |
SHD760 | 160 | 4-12 | 2.0-2.5 | 7.5 | 2900*1300*2400 |
SHD850 | 220 | 4-12 | 3.0-3.5 | 12 | 3200*1200*3100 |
SHD880 | 250 | 4-12 | 3.5-4.0 | 14 | 3300*1400*3100 |
Use of biomass particles:
1. Straw fuel is made of solid waste such as corn stalks, wheatgrass, straw, peanut shells, corn cobs, cotton stalks, soybean stalks, weeds, branches, leaves, sawdust and bark as raw materials. After pulverized, pressurized, densified and formed, it becomes small rod-like solid granular fuel. Pellet fuel is made by extruding wood chips, straw and other raw materials with roller and ring die under normal temperature.
2. The process flow is raw material collection → raw material grinding → raw material drying → mechanical granulation → bagging and selling. According to the different harvest time of crops, a large number of raw materials should be stored in time and then crushed and formed. Pay attention not to bag immediately when forming, because of the principle of heat expansion and cold contraction after cooling for 40 minutes, then bag transportation.
3, characteristics of straw fuel molding granular fuel, heavy, small size, combustion resistance, easy storage and transportation.
4, The use of straw fuel granule fuel is a new type of biological energy, it can replace wood, coal, fuel oil, liquefied gas, etc., used in heating, domestic stove, hot water boiler, industrial boiler, biomass power plant, etc.
Features of sawdust granulator:
1, easy to operate, high degree of automation
2, reasonable structure, increased use.
3, mold, adjustable particle diameter size.
4, fast pelleting speed, to solve the problem of cotton straw fiber pelleting.
5, the press wheel can be automatically adjusted to avoid the phenomenon of squeezing and stuffy machine.
6, the finished particle quality is good, easy to transport and storage.
7. Pellet fuel molding rate is above 99.5%.
Product advantages:
1. Vertical feed, directly in place.
2. The mold is stationary, the press wheel is rotating, and the material is centrifugal.
3. Two layer mold, upper and lower dual-use, cost reduction and efficiency, but also dual-use, high yield and energy saving.
4. One mold, two kinds of aperture, pressing different specifications of products.
5. Large hole mold, round pipe wire connection, increase stroke, increase compactness.
6. Annular mold, vertical structure, conducive to the granulation chamber heat dissipation and cooling.
7. Independent frequency conversion discharge device, to ensure the molding rate of particles.
8. The main machine unchanged, only replace the mold, can produce round or square diameter 6-30mm.
9. The use of German technology and equipment, imported raw materials, three variable speed, variable speed machine performance is more stable, greater torque, longer service life, less noise.
10. There are energy-saving devices on the equipment, which can save 35 percent of energy compared with similar products with the same power.
Suppliers with verified business licenses